This post is more than 5 years old
1 Rookie
•
23 Posts
0
4601
November 28th, 2016 13:00
Manage CAVA on Unity
Hi All,
Where in Unity do we run the server_viruschk server_x commands to display the virus checker information?
On the VNX we run these commands on the Data Movers, where do we manage CAVA on Unity?
I have NAS Server running on Unity as well as a Windows AV server with CEE installed.
I see that the Antivirus service is running on the NAS Server
Regards,
0 events found
No Events found!
Rainer_EMC
6 Operator
•
8.6K Posts
2
November 29th, 2016 01:00
see the svc_cava service command
you need to enable diag ssh access in the UniSphere Settings for that - then ssh into the system and login using the service user
Details are in the service commands for Unity manual available from support.emc.com
nmc74
1 Rookie
•
23 Posts
0
November 29th, 2016 10:00
Hi,
Thanks for the reply, that is exactly what I was looking for.
Best regards,
Rainer_EMC
6 Operator
•
8.6K Posts
0
November 29th, 2016 15:00
you're very welcome
Its worth looking at the service commands manual - there are other commands there that can be useful