UNSOLVED
No SNMP Support for EMC Unity ??! Really ?
Hi, I cannot find where to set SNMP to see my device status (CPU loads, BW, I/O, ..) in my PRTG or Solarwinds
Please EMC Guys .. Please do not tell me that Unity just support traps and it is not possible to add it to our monitoring software to see disk spaces and luns, interfaces, faults, CPU loads, etc ..
Rainer_EMC
6 Operator
•
8645 Posts
11762
0
Posted December 18th, 2017 05:00
If you feel strongly about it I would suggest to open a product enhancement request
DELL_ChrisHolloway
2 Intern
•
125 Posts
10547
0
Posted July 18th, 2019 01:00
Work with your local Dell EMC account team or partner, they will be able to assist with opening an RFE.vivek_asml
1 Rookie
•
30 Posts
10442
1
Posted July 26th, 2019 01:00
Hi, I think this still works, https://contact.dell.com/Product_Enhancement_Request the shame is it doesnt give any reference number or tracking number. Just a thank you Cheers, Vivek.
SteveK821
2 Intern
•
153 Posts
11762
0
Posted December 15th, 2017 06:00
Nope, not SNMP polling. Only traps.
Re: Unity SNMP Polling
From EMC KB about SNMP and Unity:
https://support.emc.com/kb/494492
Unity doesn't support any SNMP poll (get) operations, that means Unity will not reply any SNMP "get operations" like snmpwalk/snmpget/snmpbulkget/snmpbulkwalk/snmpset...