Unsolved
This post is more than 5 years old
1 Rookie
•
15 Posts
0
2255
November 10th, 2018 23:00
Unity array to centralized ESRS - Ports to be used
Hi
We have a Unity-All flash array and that needs to be managed by ESRS/VE Centralized. So does the control station ports of unity needs to be connected to the ESRS/VE host inorder for ESRS to manage the unity array ? How the connectivity happens from unity All flash to the ESRS/VE host
0 events found
No Events found!
AndreD Dell
Moderator
•
239 Posts
0
November 12th, 2018 00:00
Hi stupo,
As I told you on the other thread, you need to go through the Unity docs carefully. Unity is not VNX, so don't think of it the same way. There is no control station Unity.
All config for SRS (former ESRS) is done form the Unity GUI.
Glen already pointed you to the hub in your other thread:
Re: How to configure call Home in Unity All Flash / 450F with Centralized ESRS gateway server
I would start there to get familiar with Unity. If you need more docs after that, you can go to the support by product pages and filter for your Unity product, all the docs will be there, including the SRS setup ones.
Thanks Andre @ Dell EMC