UNSOLVED

M.Hani

updated

9 years ago

MH

M.Hani

2 Intern

138 Posts

0

1342

January 10th, 2018 06:00

UNITY SP will be powered off after power up

Hi,

I am managing a UNITY600. SPB will be powered off after power up. Whats is the problem with my SP. The UNITY600 is not initialized yet.

  • Rainer_EMC

    6 Operator

    8645 Posts

    748

    0

    Posted January 11th, 2018 02:00

    check if its seated correctly

    please open a case with support

    you can do do via phone or web on support.emc.com

    the community forum is not a replacement for a service request

  • Rainer_EMC

    6 Operator

    8645 Posts

    748

    0

    Posted January 15th, 2018 04:00

    did you work out what the problem was ?

  • M.Hani

    2 Intern

    138 Posts

    748

    0

    Posted January 16th, 2018 01:00

    Not yet. The SP power LED is off, the SP fault LED is amber and after a few seconds all LEDS will be off. Regret it is a failure with SP.

  • AndreD Dell

    Moderator

    239 Posts

    748

    0

    Posted January 16th, 2018 02:00

    I agree with Rainer. The forums are not the correct place for this kind of issue/question.

    Please open a support case asap.

    This sounds like a hardware issue and we need to look at logs to determine why the SP is shutting down.

    My guess (from experience) would be that one or more internal cooling fans might be faulted. When this happens, a timer is tripped to prevent the SP from over heating, and the SP is shut down.

    Maybe try reseating all the fan on the SP (internal - please follow the docs as reseating incorrectly may lead to more problems).

    In any case, nothing should be done here until a support SR is opened.

    Thanks

    Andre @ Dell EMC