This post is more than 5 years old
7 Posts
0
3522
M&R, custom alert for VVolumes WriteLatency
Hi,
İm trying to configure custom alert for write latency of virtual volumes .but I'm getting incorrect results ,you can see my data filtering ,treshold and mail action in screenshots
Can anyone help me to correct that why im gettin incorrect values from mail action ?
Thanks
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
June 4th, 2018 13:00
Hi A1gah,
In our SRM 4.2 lab I re-created your custom VPLEX alert. It worked successfully in the lab. I did review the collected metrics using a File-Connector before I created the alert. This allowed me to be sure the VirtualVolume data was being collected. It also let me know that the value of FeWriteLat is always zero in our lab. So, I had to adjust the comparator to compare against a value of zero. See my screenshots below.
You need to make sure your perpetual monitors are working correctly, which allows SRM to collect the virtual volume performance data. Also, I noted the metrics, FeWriteLat, is not available in all the previous versions of SRM. What version are you using?
Regards,
Nancy
An N/A alert has been received with the following attributes:
Message: N/A
Device: FNM0012xxxxxxxxx
Device Type: VirtualStorage
Severity: N/A
Source: N/A
Source IP: N/A
Part Type: VirtualVolume
Part: device_CLARiiONxxxx_LUN_xxxxx_1_vol
Category: N/A
This is an auto-generated email. To change the notification settings, consult the site administrator.
a1gah
7 Posts
0
June 5th, 2018 12:00
Hello Nancy,
i solved today , im getting values from "performance - per director ". i dont know how to disable director filter, i just want to see performance section .
Thanks for your time .:)