Solved!
Go to SolutionViPR SRM report on luns assigned per service processor
Good day,
Is there a way to create a report on the LUNs assigned per service processor in VNX? We usually use the report to check if LUN assignments are balanced across the 2 service processors.
We are currently generating the list via Unisphere, we trying to figure out if theres a way for generate a similar report under ViPR SRM
Thank you
1283
0
Posted July 10th, 2017 19:00
Thanks Vaishak.
Very much appreciated
1283
0
Posted July 11th, 2017 20:00
Hi Vaishak,
Follow up question on my lun assigned per service processor, is there a way to display the current and default owner of the LUN? Just to check if we have tresspassed LUNs
Thank you
1283
1
Posted July 18th, 2017 12:00
Hello Zerocoolit
I checked to see if there is a property on a LUN that separately defines the default SP and unfortunately I couldn't find one.
The property that defines the Storage Processor for a LUN is called "memberof" and it only gives you the current owner and not the default owner.You can refer ViPR SRM 4.1 - SolutionPack Property Definitions Matrix and look at the EMC-VNX tab to get a list of all properties that's available for a LUN.
Hope that helps
Regards
Vaishak
1283
0
Posted July 18th, 2017 19:00
Thanks Vaishak
nerdnair
1 Rookie
•
68 Posts
1283
1
Posted July 10th, 2017 06:00
Hello Zerocoolit
Which version of ViPR SRM are you running ? I am on v 4.0.1
If you browse to Report Library>>EMC VNX>>Inventory>>Block Components>>Storage Processors it should give you the no: of LUNs per SP for each VNX array.
Hope this helps.
Regards
Vaishak