Unsolved
This post is more than 5 years old
1 Message
0
102780
December 13th, 2012 23:00
MemBist error: DIMM A4, D5
Hello to everyone,
i have a Dell PowerEdge R810 where i recently change the motherboard which has a problem, and then i have an error message:
MemBist error: DIMM A4
MemBist error: DIMM A4
Lockstep Pair: A3 & A4 disabled
Please replace the DIMM or Remove e lockstep pair
MemBist error: DIMM D5
Lockstep Pair: D5 & D6 disabled
Please Replace The DIMM or Remove the Lockstep pair
normally, the Dell PowerEdge R810 has 4 CPU with 32 slots for RAMs and all RAMs have a total size of 64 GB and with that error is currently showing 52 GIB.
the server has an OS of Vmware ESXI 5.0
therefore, i would so pleased if i can get a help of you. and Thank you in advance for any help that will be provided to me
DELL - Boris G
5 Posts
0
December 21st, 2012 02:00
I have seen this error before and this can indicate that you have DIMM faults or they are starting to get faulty. What i usually do when i have this kind of error is to try and reseat the memory dimms in another slot and boot up again to see if the same error occurs in the other slot.
If this does not work then its to call Dell support to replace the faulty dimms.
Best regards Boris