Solved!
Go to Solution871
0
Posted February 23rd, 2012 17:00
Click on Virtual Machine Count (see screenshot) and then type any number you like.
871
0
Posted February 23rd, 2012 17:00
can't see screenshot
871
0
Posted February 23rd, 2012 17:00
Thank you
871
0
Posted February 23rd, 2012 17:00
Do you know if there is a report/dashboard out of the box that will display all of my Datastores/LUNs and all VMs that are in those Datastores?
871
0
Posted February 23rd, 2012 18:00
could you try to re-upload the screen shot. not readable again. thanks
871
1
Posted February 23rd, 2012 18:00
Goto Reports - Run a Report, then filter on datastore (see below). Hover over description and it will pop.
Datastore Capacity for example shows "The capacity of the selected datastores and which ESX Servers and Virtual Machines are connected to it."
There are also views available for this if you want to show it on a dashboard.
871
0
Posted February 23rd, 2012 19:00
Re-uploaded it.. Strange, what browser are you using? I will tell our community team about this problem to see if they know about it..
871
0
Posted February 23rd, 2012 19:00
I do not have this one for some reason
51
0
Posted February 23rd, 2012 22:00
Our Community team has confirmed that we have problem with image uploads at the moment. A scheduled upgrade is planned for next week to solve this problem.
Regarding the report you where missing is because the system I was using did apparently not use GA code. Instead check "Datastore Reclamation and Addition" report. It contain same data and optimization recommendations as well.
Take a look at your reports that are available. If you don't find what you need you'll have to create a custom report.
Sorry for the confusion!
/Mattias
sundling
73 Posts
871
1
Posted February 23rd, 2012 17:00
Strange, I removed it and added it again. Try reload the page again please.
Works from my Mac and iPhone (Safari browser).