Unsolved
This post is more than 5 years old
1 Rookie
•
32 Posts
0
1045
May 28th, 2014 10:00
Symclone question
can we recreate and activate a clone when its in precopy status?
Device Group (DG) Name: CLONE24_1730_1718_RDC_CCU_TMPLT
DG's Type : ANY
DG's Symmetrix ID : 000195701718
Source Device Target Device State Copy
--------------------------------- ---------------------------- ------------ ----
Protected Modified Modified
Logical Sym Tracks Tracks Logical Sym Tracks CGDP SRC <=> TGT (%)
--------------------------------- ---------------------------- ------------ ----
DEV001 11FB 0 0 TGT001 19DA 0 XXXX PreCopy 100
Total -------- -------- --------
Track(s) 0 0 0
MB(s) 0.0 0.0 0.0
Legend:
(C): X = The background copy setting is active for this pair.
V = The VP Snap setting is active for this pair.
. = Neither setting is active for this pair.
(G): X = The Target device is associated with this group.
. = The Target device is not associated with this group.
(D): X = The Clone session is a differential copy session.
. = The Clone session is not a differential copy session.
(P): X = The pre-copy operation has completed one cycle.
. = The pre-copy operation has not completed one cycle.
AranH1
2.2K Posts
1
May 28th, 2014 10:00
In the back of the 'Solutions Enabler Symmetrix TImeFinder Family CLI version 7.6 Product Guide' are tables that list the allowed actions for a given state of the TF devices.
In the TimeFinder State Rules Reference table the recreate command can only be used when the clone pairs are in the copy in progress, copied, split, or failed state. So you would first need to activate the clone pairs then you could immediately execute the recreate command (since they will be copy in progress after the activate).
SYMCLIGuy
98 Posts
0
June 2nd, 2014 07:00
Why do you feel you need to issue a recreate? If the session is in the precopy state then you haven't selected you point-in-time for the target yet.
What are you trying to accomplish with the recreate?