Solved!
Go to SolutionUnisphere for VMAX - exporting data
Hello folks,
just recently deployed Unisphere for VMAX 1.6.0.8 OVA, works great, much faster than my SMC/SPA 2.2.2 installation. My goal is to be able to extract UPV and bin files from the Unisphere appliance and store them on Performance Viewer appliance to be able to view historical performance data. According to the install guide these files are going to be stored under SMAS/Backup/ .... The question is how do i get to that directory on the appliance itself. I tried to ssh to the appliance but got nothing so i assume ssh is disabled ? Before is start going down the road of brute force (single mode boot, reset root password ..etc), is there a documented way to extract those files from the appliance ?
Thanks
3190
0
Posted July 3rd, 2013 02:00
Hi Dynamox,
If you are wondering how to export data out of your Unisphere appliance then you can try the following (I have not tried it myself but it should work):
1) Take the console of the Unisphere appliance.
2) press ALT + F2. It will take you to the prompt.
3) enter vappadmin credentials.
4) then use sftp command to export your data. SFTP works on the appliance.
Ignore if you have already tried it
regards,
Saurabh
3190
0
Posted July 3rd, 2013 03:00
logging it to console with seconfig credentials does not work, sftp uses ssh protocol ..if i can't ssh into the appliance i can't use sftp.
3190
1
Posted July 3rd, 2013 05:00
As from what i see from KB 86315, SSH is not possible. But the default login credentials to the VAPP console are vappadmin/vappadmin.
3190
0
Posted July 3rd, 2013 05:00
yes, ssh does not work but you can do sftp from the appliance to another server using vappadmin credentials.
regards,
Saurabh
3190
0
Posted July 3rd, 2013 05:00
Logged-in with vappadmin account, it’s running rbash so I can’t cd into any directory on the file system.
3190
0
Posted November 13th, 2013 08:00
activate ssh on your appliance and use cseadmin/cseadmin
now for me searching how to modify my.cnf to tune mysql with more memory and direct io also
3190
0
Posted March 25th, 2014 18:00
1. You would have to enable ssh access
https://vApp IP:5480 seconfig/seconfig
Command Execution->Host Configuration->Enable SSH
2. Now you can ssh to the vApp with cseadmin/cseadmin
3. I think the directory you need is /opt/emc/SMAS/backup/SPA/STP
dynamox
11 Legend
•
20419 Posts
•
87439 Points
3190
0
Posted November 13th, 2013 08:00
Tony,
i am using native Unisphere for VMAX export functionality (i export to UPV files), that i later on scp to my Unisphere for VMAX offline viewer for later analysis and historical information ..works pretty well.