Using Gatekeeper on Cluster Microsoft Hyper-V using "Pass-Through Disk"

Hi,

Someone has configured "gatekeeper" on a Virtual machine under a Cluster Microsoft Hyper-V using "Pass-Through Disk"

I tried but  I got this message in Virtual Machine using "Solutions Enabler"

>symcfg discover

This operation may take up to a few minutes. Please be patient...

The gatekeeper device (while using the Base Daemon) has an error (Please see the

Log file)

To check GK devices

>syminq

           Device                   Product                      Device

-------------------------- --------------------------- ---------------------------

Name                Type   Vendor    ID           Rev  Ser Num            Cap (KB)

-------------------------- --------------------------- ---------------------------

\\.\PHYSICALDRIVE0         Msft      Virtual Disk 1.0  N/A                62914560

\\.\PHYSICALDRIVE1         Msft      Virtual Disk 1.0  N/A                11534336

\\.\PHYSICALDRIVE2         Msft      Virtual Disk 1.0  N/A               146800640

\\.\PHYSICALDRIVE3  GK     EMC       SYMMETRIX    5876 35000AC000             2880

\\.\PHYSICALDRIVE4  GK     EMC       SYMMETRIX    5876 35000AD000             2880

\\.\PHYSICALDRIVE5  GK     EMC       SYMMETRIX    5876 35000AE000             2880

\\.\PHYSICALDRIVE6  GK     EMC       SYMMETRIX    5876 35000AF000             2880

\\.\PHYSICALDRIVE7  GK     EMC       SYMMETRIX    5876 35000B0000             2880

\\.\PHYSICALDRIVE8  GK     EMC       SYMMETRIX    5876 35000B1000             2880

\\.\PHYSICALDRIVE9  GK     EMC       SYMMETRIX    5876 35000B2000             2880

\\.\PHYSICALDRIVE10 GK     EMC       SYMMETRIX    5876 35000B3000             2880

\\.\PHYSICALDRIVE11 GK     EMC       SYMMETRIX    5876 35000B4000             2880

\\.\PHYSICALDRIVE12 GK     EMC       SYMMETRIX    5876 35000B5000             2880

\\.\PHYSICALDRIVE13 GK     EMC       SYMMETRIX    5876 35000B6000             2880

\\.\PHYSICALDRIVE14 GK     EMC       SYMMETRIX    5876 35000B7000             2880

In Symapi.log

07/08/2015 16:36:08.413    592   1680 EMC:SYMCFG                SymDiscover()        Function start

07/08/2015 16:36:11.835    592   1680 EMC:SYMCFG                iFindandOpenGate     Failed to open pooled Gatekeeper: There is no gatekeeper device that can be used to communicate with the symmetrix (000192604935)

07/08/2015 16:37:02.460   1272   3312 EMC:SMI Provider          SymDiscover()        Function start

07/08/2015 16:37:05.772   1272   3312 EMC:SMI Provider          iFindandOpenGate     Failed to open pooled Gatekeeper: There is no gatekeeper device that can be used to communicate with the symmetrix (000192604935)

07/08/2015 16:48:09.491   3580   2352 EMC:SYMCFG                SymDiscover()        Function start

07/08/2015 16:48:12.882   3580   2352 EMC:SYMCFG                iFindandOpenGate     Failed to open pooled Gatekeeper: There is no gatekeeper device that can be used to communicate with the symmetrix (000192604935)

I searched and I found this rules on Hyper-V servers:

1. The gatekeepers cannot be cluster disks (owned by the cluster).

2. If the gatekeeper is a thin device, it must be bound to a pool

3. SCSI command filtering must be disabled using Pass-through. See document h6643-symmetrix-microsoft-hyper-v-wp.pdf

4. Native MPIO is supported on the parent Hyper-V server if using Enginuity 5876 and Solutions Enabler 7.4 or later.

My doubt to know is if is possible do this kind of configuration (GK+Pass-Through Disk+VM on Cluster HyperV+SE?

Regards

Jose Luis