So i tried this in my lab, i was able to connect to nested ESXi 5.5 vSphere server from within Unisphere but it did not discover any VMs. Ты cмог тоже добавить но не видел виртуалнии машины ?
yes. I also added vCenter but I do not see ESXi host and guest machines on them. VSI is installed on the vCenter and added the unit itself, but it also fails. I added the ESX host manually Unisphere and tied to StorageGroup, but still fails to mount the disk.
last time i used VSI i did not have to add vSphere to Unisphere, i did have to add Unisphere to VSI. There should be a configuration page in VSI where you specify SPA, SPB and credentials for Unisphere.
Did anyone ever get a resolution to this issue? I've got a slightly older CX4-120 that I'm trying to connect our lab VCenter 5.5 to and it adds in the host in Unisphere but does not populate the two hosts underneath. Trying to add use VSI gives the same error mentioned above. Not sure what options are out there to resolve? Thanks.
Roger_Wu
6 Operator
•
4K Posts
0
November 23rd, 2013 23:00
So everything is alright?
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
November 24th, 2013 07:00
once vCenter is added and when it works properly it should display virtual machines.
fzaur
5 Posts
0
November 24th, 2013 21:00
пробовал, но на втором шаге он ведь выдает список доступных ESX хостов, а таковых там нет, т.к. откуда им там взяться?!
fzaur
5 Posts
0
November 24th, 2013 21:00
can you tell what's wrong and why not shown ESXi hosts. vSphere 5.5 установлен неделю назад. То же самое на vSphere 5,1. Вроде делаю все по мануалу.
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
November 24th, 2013 21:00
пробовал добавить проcто ESX cервер а не vCenter ?
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
November 24th, 2013 22:00
i'll try it in my lab tomorrow (running nested ESXi and vCenter Server appliance ..but it should not matter)
fzaur
5 Posts
0
November 24th, 2013 22:00
Do you know what this red icon?
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
November 25th, 2013 20:00
So i tried this in my lab, i was able to connect to nested ESXi 5.5 vSphere server from within Unisphere but it did not discover any VMs. Ты cмог тоже добавить но не видел виртуалнии машины ?
fzaur
5 Posts
0
November 25th, 2013 22:00
yes. I also added vCenter but I do not see ESXi host and guest machines on them. VSI is installed on the vCenter and added the unit itself, but it also fails. I added the ESX host manually Unisphere and tied to StorageGroup, but still fails to mount the disk.
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
November 25th, 2013 22:00
last time i used VSI i did not have to add vSphere to Unisphere, i did have to add Unisphere to VSI. There should be a configuration page in VSI where you specify SPA, SPB and credentials for Unisphere.
abertram1
1 Message
0
January 4th, 2014 12:00
Did anyone ever get a resolution to this issue? I've got a slightly older CX4-120 that I'm trying to connect our lab VCenter 5.5 to and it adds in the host in Unisphere but does not populate the two hosts underneath. Trying to add use VSI gives the same error mentioned above. Not sure what options are out there to resolve? Thanks.