Unsolved
This post is more than 5 years old
2 Posts
0
2451
September 2nd, 2015 05:00
Cannot Login to vVNX
I just downloaded and installed vVNX.
After powering on, I get to the spa login prompt.
The install guide mentions that the default login is admin/Password123. However, that doesn't work.
I also tried, nasadmin/nasadmin which doesn't work.
There was a suggestion in another thread about installing the OVA through the vsphere web client. Tried that as well, and it still brings me to the same prompt, and I cant seem to log in.
No Events found!
cqde_89d27a
33 Posts
0
September 2nd, 2015 09:00
If you are trying to log into the console to manually set the IP, the username and password are both; service
Once logged in, run; svc_initial_config
See page 5 of the Install guide for more details.
The credentials you posted are for Unisphere, except the password is; Password123#
hanover_com
2 Posts
0
September 2nd, 2015 11:00
The service password lets me log in.
I had set up the IP address during the OVA deployment.
Through the browser, I can get to the first page, warning me about untrusted connection, but the webserver doesn't seem to be running.
It seems to me that it is partially configured.
TobyElliott
7 Posts
0
September 18th, 2015 07:00
I have the same issue,
My vVNX is configurable via unisphere but I cannot log in vi the console
admin and Password123? does not work
Has anyone managed to log in via the console?
sunilkumaremc
27 Posts
0
September 26th, 2015 01:00
if you are logging to console, try username and password as below:
service/service
service/Password123#
This should allow you to login.
TobyElliott
7 Posts
0
September 30th, 2015 01:00
I can log in with this account but this only enables service operations.
svc_etc, etc
I need nasadmin or sysadmin rights to set up an http connection