Correct Rainer, but if the upgrade in on a system whit 2 Control Stations, the you can't use USM on that revision, this was first fixed in release 7.0.50-2, there is a Primus describing this.
Anohter thing, remebber to upgrade the OE for File first and the the required OE for block afterwards
Rainer_EMC
4 Operator
•
8.6K Posts
0
January 26th, 2012 15:00
Please use the GUI – UniSphere Service Manager
Its by far the easiest way.
It will download the code for you, perform the pre-upgrade health checks and do the actual upgrade.
Rainer
Kenneth_Hansen
7 Posts
0
January 27th, 2012 00:00
Correct Rainer, but if the upgrade in on a system whit 2 Control Stations, the you can't use USM on that revision, this was first fixed in release 7.0.50-2, there is a Primus describing this.
Anohter thing, remebber to upgrade the OE for File first and the the required OE for block afterwards
Kenneth
Clustor
57 Posts
0
January 30th, 2012 13:00
I thought systems with 2 control stations have a upgrade procedure which had to be performed by EMC support prior version 7.0.50-2.
If it's a procedure that's generally available however, i'd like to learn how to do that as well.