Migration from NetApp to VNX File

Question

We are migrating a FAS250 to VNX5500 with multiprocol shares. Issue 1. We added the server_params. server_param server_2 -facility cifs -modify acl.mappingErrorAction -value 3 server_param server_2 -facility cifs -modify acl.retryAuthSid -value 600 server_param server_2 -facility cifs -modify acl.FailOnSDRestoreError -value 0 From pervious posts, we have run LGDUP to copy the groups to the VNX. lgdup.exe -v c:\lgdup.txt \netapp \vnxfile://\new When I run the following emcopy, I receive copious error messages, below. C:\emc\CifsTools\emcopy
t\emcopy64 \netapp\share \vnx\share /o /s /d /q /secfix /purge /stream /c /r:1 /w:1 /log:c:\emcopylog_share.txt We are running this from a CMD prompt with elevated privledges (Domain Admin account), CTRL+SHIFT, right click on CMD shortcut. Any assistance with resolving these error messages would be greatly appreciated. Issue2. There is a ~snapshot directory that is being copied for each file system, is there a way to exclude this from the copy? ==================== I have removed the file names and listed single instances of the messages. TH052 : 11:48:50 : ERROR (112) :  -> Unable to reserve file space, Retrying in 1 seconds... TH062 : 11:48:50 : ERROR (112) :  -> Unable to reserve file space, Retrying in 1 seconds... TH064 : 11:48:52 : ERROR (112) :  -> Unable to create file TH056 : 11:48:52 : WARNING :  -> DELETED due to copy ABORT TH045 : 11:48:55 : ERROR (2) : -> DELETION FAILED. TH026 : 11:48:58 : ERROR (112) :  -> Unable to create file Copy engine Statistics====================== File(s) copied                            : 2155File(s) recovered                         : 0Directory(ies) created                    : 501Copy of File(s) failed                    : 3537 !Creation of Directory(ies) failed         : 480 !Security Descriptor Setting(s) done:      : 3627Security Descriptor Setting(s) failed     : 3047 !Number of Deleted file(s)                 : 1091Number of Deleted file(s) failed          : 2446 !Amount of copied byte(s)                  : 717 MB (752 718 963 Byte(s))Estimated copy bitrate                    : 4138.813 KB/sGlobal copy duration                      : 177.606 Elapsed time: mins: 02, secs: 58

dynamox · Answer

what permissions do you have on the target ? (share and ACL)

AdamFox · Answer

Another way to exclude the ~snapshot directory is to hide it from the controller side. ontap> vol options nosnapdir on The directory will still exist, but will not show up when you scan for it.

bergec · Answer

Error 112 is a space reservation error (use net helpmsg XXX from a command prompt)

Could be sparse files or copying too many files at the same time (by default EMCopy uses 64 threads I think)

If there are local groups on the source (or local users) then look at the /lg and /lu switches

You can use the /xd switch to exclude directories (such as snapshots)

Claude

jstottmann · Answer

From Computer Mangement, the account is in the Administrators group. From the Copy engine Statistics some of the files and directories have copied correctly, that is what is perplexing.

jstottmann · Answer

Thank you all for pointing me in the correct path.

The file system was full. The ~snapshot was consuming capacity, more than the actual file system. Once I was able to exclude that, the emcopy was able to complete successfully.

bergec · Answer

Spase file ? Also remember that blocks on Netepp are 4k but 8k on Celerre Claude

jstottmann · Answer

Very true, the file system is the same size as the original. So, the capacity should be ok. There are no quotas on this file system.

dynamox · Answer

very odd error message (unable to reserve file space), there is plenty of capacity and not hard quotas that could be interfering ?

VNX

Migration from NetApp to VNX File

Was this post helpful?