Unsolved
This post is more than 5 years old
35 Posts
0
1043
April 15th, 2016 08:00
Which servers/switch are connected to VNX5700/vplex
So I have VNX5700 behind a vplex, I want to see which servers/switch are connected to the VNX. Also, which servers are connected to the vplex. Im doing a migration and there are some servers/switch connected to the vplex and some connected to the vnx5700. Can you please provide me a step by step on how I can find this info in gui for vnx5700 and vplex v5.1? Please be detailed as much as you can.
No Events found!
wshah2
35 Posts
0
April 18th, 2016 10:00
also is there a cli command for vnx that will show me all the switches that are connected to the vnx?
ZaphodB
195 Posts
0
April 18th, 2016 18:00
It sounds like you are looking for zoneset information. Is this a Brocade or Cisco fabric?
You can also look at the initiator tab under hosts to confirm which hosts are logged into which targets and then match that against which ports are zoned to the vplex and which are zoned to hosts.
wshah2
35 Posts
0
April 19th, 2016 09:00
Its a cisco fabric. Your reply is good but a bit confusing to me. Can you break it down for me please and/or provide any pictures that might be helpful?