UNSOLVED
set subnet failure
Did some one encountered the same issue? The Vplex mode is VS2, and the detail error messages as below:
VPlexcli:/> set /clusters/cluster-1/cluster-connectivity/port-groups/port-group-0::subnet /clusters/cluster-1/cluster-connectivity/ subnets/cluster-1-SN00
set: Evaluation of <
/clusters/cluster-1/cluster-connectivity/subnets/cluster-1-SN00>> failed.
cause: Failed to update value of 'subnet'.
cause: Unable to execute firmware command.
cause: No directors on which to execute command
Thanks in advance!
Feng
jennyvus
2 Intern
•
31 Posts
491
0
Posted December 12th, 2013 11:00
Hello there,
I would recommend that you open up a SR. It isn't clear whether you are having cli to director issues or WAN COM connectivity issues; too many areas to check.
thank you .