vplex mapping file for netapp

Do you have access to the procedure generator, the info is in there, if not let me know.

Hello.

Thank you for answering.

No, don't have access to the generator.

najman

נחמן כהנא | צוות סיסטם | אגף מערכות מידע | מרכז רפואי הדסה

טלפון: 02-6777313 | נייד: 054-7562720| דוא"ל: najman@hadassah.org.il

Najman the command from CLI to claim storage using mapping file is:

claimingwizard –f /tmp/array_name.txt -c cluster-ID

Hello Najman,

if Ankur or someone else given you the answer here is the answer:

To create a mapping file for the VPLEX Claiming Wizard:

Type the following commands to change to the storage-volumes context:

cd /clusters/cluster-ID/storage-elements/storage-volumes/

From the storage-volumes context, type the ll command to list all storage volumes.

Cut and paste the output on the screen and save it to a file.

Create a txt file and type the heading Generic storage-volumes at the beginning of the file as shown in the following example:

Generic storage-volumes

VPD83T3:60060e801004f2b0052fabdb00000006 ARRAY_NAME_1

VPD83T3:60060e801004f2b0052fabdb00000007 ARRAY_NAME_2

VPD83T3:60060e801004f2b0052fabdb00000008 ARRAY_NAME_3

VPD83T3:60060e801004f2b0052fabdb00000009 ARRAY_NAME_4

Use this file as a name mapping file for the VPLEX Claiming Wizard by using either the VPlexcli or the GUI. If using VPlexcli, the name mapping file should reside on the SMS. If using the VPLEX GUI, the name mapping file should be on the same system as the GUI.

Hope it is going to help you

Best Regards

Hi Najman,

glad to help you.

Mets is a good team. But NY Yankees is a legend!!!!!

Have a nice day. I will be very happy to help you regarding VPLEX matters.

Best Regards

John

Again, thank you.

Actually, i am mets fan. . .

Be well, najman

Sent from Samsung Mobile

Thank you.

Najman

Sent from Samsung Mobile

I would also add that you should run the claimingwizzard command for the first time using the "-d" option. This option is what if (do not do). You will see the volumes being claimed and their names. Also please reference my post in the VPlex group on LinkedIn "stop the investigation" for helpful naming suggestions

Steve

Sent from my iPad

Hello John,

I am trying to create a name mapping file for HP3PAR to vplex, txt file has VPD83T3:xxxx Array_Name_1 i save it as test and used through GUI. I am getting error as Name mapping file provided is invalid.

Can you help me on this.