Unsolved
This post is more than 5 years old
2 Posts
0
17004
Wyse E02 and WMS2011 - Assigning clients and server crashes
Wyse E02 and WMS2011 - Assigning clients and server crashes
I've got a bit problem here, the boxes i'm using as WMS2011 servers have been sat running happily for weeks without issue before having any clients assigned to them, as soon as i assign clients to the servers be it the 1st or 10th client to add, when the screen flickers (i assume this is the wyse driver doing something) the server goes black.......I can get to services + event viewer of the server remotely still but i get tons or errors cropping up informing me that services are timing out.
Specifically the first error is to do with NUserver64 and it says something along the lines of connect timeout, after that services start timing out and the only way to get the server back online is to force it off by the power.
Can anyone shed some light on this? Fairly urgent, will open a support ticket soon but still waiting for account activation.
I should probably add that the "server" i'm using isn't on server based hardware, it's running off a standard high powered desktop PC at the moment (i7 3770, 32gb ram, asus P8H77 motherboard)
mrbios-2015
2 Posts
0
June 2nd, 2015 09:00
So i've just watched the device manager as it assigns clients, on the 6th client just as the trigger II video device or whatever its name is appeared the black screen popped up and the server locked up.
Sometimes i can reboot the server and it'll start up the first 5, allow me to remove the 6th and once the drivers have added it'll sit there quite happily, but it seems to be a game of chance as to whether that driver will crash the box or not.
Could it be conflicting with the Intel HD4000 onboard graphics chips drivers? Would a different video card help matters?