My Studio XPS 8100 is taking a long time to start. But in safe mode is start faster. I opened the box and found a yellow light next to the ram. Is there any problem with board or power supply? How to make boot faster? I tried to install more ram. But it gives beeping sound and computer start and stop in few seconds. Please help. I have lots of programs installed in system.
The LED on the motherboard means that it is getting power. The 9 year old Studio XPS 8100 can only use 16GB (4 sticks, matching either 1066 MHz DDR3 or 1333 MHz DDR3 unbuffered, DDR3).
* Turn the Studio XPS 8100 off * Disconnect the power cable from the rear of the Studio XPS 8100 * Open the tower * Remove the added memory * Reinstall the originally shipped memory * Reseat every card, cable to the motherboard and to all devices * Replace the cover * Plug the power cable back into the Studio XPS 8100 * Power it on. What happens?
Could be anything from too many drivers or software pieces loading at startup to the first symptoms of a failing drive. Run an extended diagnostic on the hard drive (F12 at powerup) to rule out the second option.
If the drive clears the extended (not just quick) test, then start by looking at what's loading at startup time (msconfig can help with this).
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
899
0
Posted March 9th, 2018 07:00
The LED on the motherboard means that it is getting power. The 9 year old Studio XPS 8100 can only use 16GB (4 sticks, matching either 1066 MHz DDR3 or 1333 MHz DDR3 unbuffered, DDR3).
* Turn the Studio XPS 8100 off
* Disconnect the power cable from the rear of the Studio XPS 8100
* Open the tower
* Remove the added memory
* Reinstall the originally shipped memory
* Reseat every card, cable to the motherboard and to all devices
* Replace the cover
* Plug the power cable back into the Studio XPS 8100
* Power it on. What happens?
DELL-Chris M (old account)
#IWork4Dell