UNSOLVED

aanil

updated

3 years ago

Closed

A

aanil

1 Rookie

7 Posts

0

943

July 14th, 2023 15:00

Aurora R13, Cryo-Tech Cooling upgrade

12th Gen Intel Core i9-12900F (30 MB cache, 16 cores, 24 threads, 2.40 GHz to 5.00 GHz Turbo)

I have purchased Aurora R13 with the above processor. The system with liquid cooling. I have purchased a Dell Cryo Tech cooling and installed. However, the command center never recognize this upgrade. 

I tried to install Intel Cryo Cooling Software from Intel website but the error states the processor is not compatible. 

However, Dell is selling R13 with this type of processor and CryoTech cooling.  

Even the Techie from Dell is helpless. 

Appreciate any help.

  • Vanadiel

    8 Professor

    7088 Posts

    29677 Points

    236

    0

    Posted July 14th, 2023 16:00

    I am not sure what you are trying to do with the cooler, but the Cryo tech cooling from Dell is not an Intel product.

    Intel does sell cryo cooling, but that is a completely different product.

    Intel Cryo Cooling Technology 

    Intel Cryo cooling video 

     

     

  • 215

    0

    Posted July 15th, 2023 06:00

    I have the same 65w air cooled cpu

    where did you manage to get the dellcryo cooler from? As of this is second hand it could be faulty which is preventing it from working correctly 

    have you connected the headers as per the r13 user guide as I believe if you use the wrong fan connectors on the motherboard  it will throw up errors And prevent the command centre from seeing it correctly

  • aanil

    1 Rookie

    7 Posts

    207

    0

    Posted July 15th, 2023 07:00

    https://www.ebay.com/itm/204375027270

     

    PArt number: 27WXG

     

  • aanil

    1 Rookie

    7 Posts

    210

    0

    Posted July 15th, 2023 07:00

    Thank you. All the ports are connected just fine on motherboard. What could be wrong? I have purchased Cryo Cooler on eBay primarily for RGB. It looks good.

     

    I don't see any driver software from Dell to make it work. Any ideas? 

    I bought a Clear Side Panel with 1000W PSU and standard liquid cooler. I bought cryo tech cooler on ebay and then installed it on mother board as directed. Connected all the cables as per the manual. Leaving CPU FAN port as directed. 

    I am still unable to see in the command center. In addition, CPU Fan connection error pops up. If i connect to CPU cable, Rear fan error coming up. 

    Don't want to return the computer and trying to fix it. 

  • Vanadiel

    8 Professor

    7088 Posts

    29677 Points

    209

    0

    Posted July 15th, 2023 07:00

    Do you have a link to the listing? 

  • aanil

    1 Rookie

    7 Posts

    207

    0

    Posted July 15th, 2023 07:00

    Is it as simple as replacing liquid cooler with another RGB enabled liquid cooler (Cryo Tech)? No software change required? Command Center showing standard liquid cooler despite connecting Cryo Tech one. 

    The Cryo Tech RGB lights up when booting, fans rotate fine. Thermals showing wrong reading like 99 degree despite no load. 

  • ProfessorW00d

    6 Operator

    2371 Posts

    10241 Points

    74

    0

    Posted July 15th, 2023 08:00

    Clear CMOS by disconnecting power from the PSU, removing the CR2032 coin cell battery and holding in the power button for 30 seconds.

    At $150 plus thermal paste you must have wanted that RGB bling pretty bad.

  • Vanadiel

    8 Professor

    7088 Posts

    29677 Points

    197

    0

    Posted July 15th, 2023 08:00

    I am assuming you removed the original thermal paste and replaced it with a new application of thermal paste?

  • 73

    0

    Posted July 15th, 2023 08:00

    And done the cmos reset after making the changes?

  • aanil

    1 Rookie

    7 Posts

    194

    0

    Posted July 15th, 2023 08:00

    yes, i did put new paste.