UNSOLVED
Blades not coming back online
We recently moved our equipment to a new data center. We have have some older compute nodes, they are all PowerEdge M600 in PowerEdge M100e enclosures. These are all powered up but for some reason they cannot be seen on the network.
If I log into the Dell Chassis Management Controller interface for the enclosure I can access them. I have tried setting the First Boot Device to PXE and warm booting them boot they still did not come back. I really don't know much about this equipment and would greatly appreciate any advice that would help me trouble shoot this and get them back on line.
thanks
Hi Chris,
The enclosures were both working and able to show their blades to our network before moving. The front panel LCD screens do indicate any problems. I see in the Chassis Management Controller there is a Diagnostic Console. Where can I find some commands to run to check it?
thanks
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
3083
0
Posted October 29th, 2018 12:00
That sounds like there may be an issue with one of the switches on the enclosure. Are you seeing any errors regarding one of them, or a diagnostic return? Have you changed any hardware prior to this?
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
3161
0
Posted October 25th, 2018 06:00
Snackers,
With the system running properly before the move and not afterwards, I would assume that something may have come loose or just isn't seated properly anymore. I would suggest going through the enclosure checking that everything is seated and secure. Beyond that I would run the diagnostics and see if anything comes up. Is the LCD showing anything regarding an issue?
Let me know what you see.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!