Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
Power calculator
Where can I find emc power calculator? Every time we get a new unit, I am asked to provide max amps the whole device draws before it can be racked and I always spend long time looking for the power requirement for each unit and add them up.
Now, I am looking for max amps for NS20: cs, single blade, two SPs, two DAEs (1, 15 x 300 GB FC drives and 1, 15x1 TB SATA).
Would be nice to find a power calculator for celerras and clariions I can always use.
Thanks
Now, I am looking for max amps for NS20: cs, single blade, two SPs, two DAEs (1, 15 x 300 GB FC drives and 1, 15x1 TB SATA).
Would be nice to find a power calculator for celerras and clariions I can always use.
Thanks
Rainer_EMC
6 Operator
•
8645 Posts
5353
0
Posted August 15th, 2008 09:00
I just checked - it still is only available internallyRainer_EMC
6 Operator
•
8645 Posts
5353
0
Posted August 15th, 2008 10:00
here's the latest info
A customer can get a copy of the current Power Calculator (Windows Tool) under NDA
We plan to release a customer version next year that will be available from EMC.comjohn_smith1
1 Message
5353
0
Posted November 5th, 2012 04:00
i want to buy vnx5500 but i want to calculate kva and btu and have not access to any partner what can i do?
That link does give some basic information, but a lot of important details are left out. I created a configuration and its missing many values like:
Peak Inrush Current:
Input Voltage:
Cabinet Plugs:
It says 2 power drops required, but that is incorrect, I know it's 2 NEMA L6-30 but 10 standard 110 VAC plugs as well (for the config I built).
Phases
Site Circuit Breaker
Line Currents
and how about wattage? You have KVA which is great but no power factor so I can't even calculate wattage on my own.
Rack units is also not populated so as a result dimensions is blank and the view is generic.
I have our EMC rep doing the calculation.
Rainer_EMC
6 Operator
•
8645 Posts
5353
0
Posted June 26th, 2008 11:00
currrently the Power Calculator is an EMC internal tool.
If you are an EMC channel partner (Velocity) you can find it on Powerlink in
Home > Tools/Resources > Other Tools > EMC Power Calculator
I have heard about plans to make a web-based version available on Powerlink for customers, but dont know when.
For now just give your local EMC technical contact the details and he'll provide you a power calculation.
Basically he'll need the model, number of data movers and the number and type of disk drives like you've written (plus the info if these drives are 10k or 15k)
Rainer