Solved!
Go to Solutionadding clariions to domain
I am trying to add 3 clariions to the same domain so I can get to all three from once place.
We have 3 CX4's with two running on 4.30.*******.511 and the other running on 4.30.*********.509
I have tried to add .509 to .511, .511 to .509 and .511 to .511 with no luck.
I get a "Out of Bounds" pop up window. Not sure why the error.
Thanks,
So you pick your Highest CX4 model and under domains, you try to add the ip addresses of the other CX4 arrays? Does it prompt you for credentails?
Are you using the Unisphere client or doing this thru the browser?
yes I choose the CX4-480 and tried to add the 120's to it.
Entered the ip address and it asked me for login credentials after 2-3 minutes I get the "out of bounds" pop up window.
I am using the browser? Is the client available on Powerlink? I did not know it existed. I'll look and try it from there.
Govindagouda
85 Posts
1583
1
Posted March 18th, 2011 06:00
Use the Higest version of Flare Code running CX and access the Unisphere from that
On the domain click and click fopr more clariions
Add the Clariion SP IP one by one
then you will be prompted for the login cred
add them from there we should be able to access all.
Kamala Kannan
11 Posts
1583
0
Posted July 15th, 2016 05:00
Hi
Can you let me know what are the ports you opened. even we have same problem.
Regards
Kamal
kenn2347
4 Apprentice
•
542 Posts
1583
0
Posted March 21st, 2011 07:00
Yes, there is a Unisphere Client and Server program. Just use the client. I think it works better then using the web browser. Little more responsive.
I dont know if your a partner? not sure where to get it if you are not.