usao

updated

11 years ago

U

usao

2 Intern

222 Posts

0

1845

April 27th, 2015 06:00

CX4 pool stuck?

We have run out of spare disks, and due to continued disk failures, I need to delete a pool and make it smaller.

Unfortunately, a drive failed during the drop operation, and it now appears stuck. It's been several hours with no progress.

I have 90 drives in the pool, and I need to get the pool deleted ASAP in order to create several smaller Raid Groups, which have better flexability than a single large pool.

Pool Name:  Pool2

Pool ID:  2

Raid Type:  r_6

Percent Full Threshold:  70

Description:

Disk Type:  Fibre Channel

State:  Destroying

Status:  OK(0x0)

Current Operation:  Destroying

Current Operation State:  Failed

Current Operation Status:  The unbind operation has failed; the LUN may be private (0x40008053)

Current Operation Percent Completed:  25

Raw Capacity (Blocks):  24670664832

Raw Capacity (GBs):  11763.890

User Capacity (Blocks):  13527456000

User Capacity (GBs):  6450.394

Consumed Capacity (Blocks):  0

Consumed Capacity (GBs):  0.000

Available Capacity (Blocks):  13527456000

Available Capacity (GBs):  6450.394

Percent Full:  0.000

Total Subscribed Capacity (Blocks):  0

Total Subscribed Capacity (GBs):  0.000

Percent Subscribed:  0.000

Oversubscribed by (Blocks):  0

Oversubscribed by (GBs):  0.000

  • usao

    2 Intern

    222 Posts

    1147

    2

    Posted April 27th, 2015 07:00

    Got this worked out.

    The GUI would not allow me to re-run the "delete" command, but the CLI did, so I ran another "delete" against the pool and it's continuing the delete process now.