Solved!
Go to SolutionProblem resizing LUN
Hi,
When I try resize a LUN the follow message appears:
"You cannot change LU capacity at this time.
Selected LU is being used by a feature of the Storage system.
The LUNs you have chosen will be reserved for a future growth of this LU."
I have seen what feature is used by this LUN and the result is:
/opt/Navisphere/bin/navicli -h emc_ip getlun -messner 0 -stack
Listed Driver: K10SnapCopyAdmin
But when I try to stop this process (snapcopy) give me this error:
/opt/Navisphere/bin/navicli -h emc_ip setfeature -off -feature sancopy -lun 0
Error: setfeature command failed
This version of Core Software does not support SAN Copy
Can anyone help?
Regards,
Fernando
When I try resize a LUN the follow message appears:
"You cannot change LU capacity at this time.
Selected LU is being used by a feature of the Storage system.
The LUNs you have chosen will be reserved for a future growth of this LU."
I have seen what feature is used by this LUN and the result is:
/opt/Navisphere/bin/navicli -h emc_ip getlun -messner 0 -stack
Listed Driver: K10SnapCopyAdmin
But when I try to stop this process (snapcopy) give me this error:
/opt/Navisphere/bin/navicli -h emc_ip setfeature -off -feature sancopy -lun 0
Error: setfeature command failed
This version of Core Software does not support SAN Copy
Can anyone help?
Regards,
Fernando
746
0
Posted March 28th, 2007 08:00
I have seen this once before on one of our systems, and the answer from Engineering was to reboot both SPs (one at a time). I don't really like that answer, but it worked.
I would open a case with EMC Support first, to see if there is any workaround in your case.746
0
Posted March 28th, 2007 08:00
A typo in my eyes, thanks
I tryed to turn off the wrong feature.
But, the snapview feature don't terminate:
navicli -h emc_ip setfeature -off -feature snapview -lun 0
navicli -h emc_ip getlun 0 -stack (these commands require Support)
Listed Driver: K10SnapCopyAdminnavicli -h emc_ip setfeature -off -featurename K10SnapCopyAdmin -lun 0 (these commands require Support)
navicli -h emc_ip getlun 0 -stack (these commands require Support)
Listed Driver: K10SnapCopyAdminFernando
Message was edited by: kelleg
746
0
Posted March 28th, 2007 08:00
Thanks I will await.746
0
Posted March 28th, 2007 23:00
have you stopped and removed all snapshots and clones related to that lun?746
0
Posted March 29th, 2007 02:00
How I do it?746
0
Posted March 29th, 2007 20:00
As per my understanding, All the session related to that lun must be stopped and the clones needs to be fractured.746
0
Posted March 30th, 2007 01:00
stopping snapshot sessions and fracturing clones is only the first step. snapshots and clone relations must be removed. performing these operations should be fairly straight-forward.746
0
Posted April 7th, 2007 02:00
navicli -h emc_ip snapview -listsnapableluns
Name SAMBA
Name LDAP
How I remove from this list the SAMBA ?
I try'ed with:
navicli -h emc_ip snapview -deactivatesnapshot -snapshotname SAMBA -o
Error: snapview command failed
Invalid snapshot
Snapshot does not exist
I don't have active sessions:
navicli -h emc_ip snapview -listsessions -all
No online sessions exist.
Regards,62
0
Posted April 7th, 2007 03:00
Well, I do it via navisphere.... Via command line I don't now.
My Problem is resolved, thanks everyone.
Allen Ward
6 Operator
•
2124 Posts
746
0
Posted March 28th, 2007 08:00
Was this just a typo?