Solved!
Go to SolutionConnectrixHelpe
259 Posts
4773
0
Posted September 23rd, 2008 14:00
Have you tried a "show fcns database"?ConnectrixHelpe
259 Posts
4773
0
Posted September 23rd, 2008 15:00
That is correct but there are ways to redirect the output and use other commands to locate the corresponding port.
The easiest way might be a report from FM instead.ConnectrixHelpe
259 Posts
751
1
Posted September 24th, 2008 14:00
Log into FM via FM Web Client and click on the Reports tab.
Thank you.
AranH1
2163 Posts
4765
0
Posted September 23rd, 2008 10:00
For example, I know that the HBA of my host is 21:00:00:e0:8b:80:43:70, so I run the 'show flogi database' command with an output modifier to include only entries with the pwwn of the host I am looking for.
PXDC-MDS9509a# show flogi database details | include 21:00:00:e0:8b:80:43:70
fc3/10 10 0x011000 21:00:00:e0:8b:80:43:70 20:00:00:e0:8b:80:43:70
So from the results above I see that pwwn 21:00:00:e0:8b:80:43:70 is logged in to fc3/10 which is line card module 3, port 10 and that it is in VSAN 10 and the fcid is 0x011000.