Hi Team,

I have two PS-100E arrays. I have successfully updated one array from 3.3.1 to 4.0.7 using ftp and serial cable. However I am unable to update the second array. I can copy the .tgz up ok: This is an ls:

ftp> ls
200 PORT command successful.
150 Opening ASCII mode data connection for 'file list'.
usr
MgmtExec.core
MgmtExec.1.core
VolExec.1.core
kit_V4.0.7-R94173_4244411.tgz
sumo0310.bin
226 Transfer complete.

However when I connect in via serial to run the udpate this is the error I get

12:40:39 Updating from kit file "kit_V4.0.7-R94173_4244411.tgz"
12:40:39 Unpacking kit file and verifying integrity.
tar: couldn't write to file eqlstor.gz : No space left on device
12:40:43 Update kit has a checksum error. Update aborted. Copy a new kit to the array.
awk: cmd. line:2: (FILENAME=- FNR=76) warning: error writing standard output (No space left on device)
UKESMINTD01> 216:0:logevent:12-Jun-2013 12:40:43.190001:logevent.c:242:ERROR:30.4.1:Array firmware update from version V3.3.1 to  failed. Reason: Update kit has a checksum error.  Update aborted.  Copy a new kit to the array..

I have removed the .tgz with ftp and rebooted array. I have downlowded and copied up a new file several times, as well as rebooting the array to no effect. I am not sure how or what to delete to create more space

This is the ls from the array that updated successfully. It has different contents from the problomatic one above.

150 Opening ASCII mode data connection for 'file list'.
usr
netmgtd.core
MgmtExec.1.core
226 Transfer complete.

It's probably something obvious, how can I create more space?

Thanks