UNSOLVED
Problem with two ethernet cards
I recently purchased a couple Inspiron 530N machines and would like to run them with two ethernet cards. I installed a PCI gigabit ethernet card and now the on board lan is not recognized, although the gigabit is. I checked the bios and on board LAN is enabled, I downloaded the most recent version of e1000 drivers and installed them, as I've seen on other forums that there were problems without them, and gigabit is working fine, but the other interface does not load.
Here's the error I get
root@openfiler1:~# /etc/init.d/networking restart
* Reconfiguring network interfaces... eth1: ERROR while getting interface flags: No such device
SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
eth1: ERROR while getting interface flags: No such device
Failed to bring up eth1.
Here is my interfaces file:
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
iface eth0 inet static
address 192.168.1.195
netmask 255.255.255.0
auto eth0
iface eth1 inet static
address 192.168.2.195
netmask 255.255.255.0
auto eth1
Any help would be appreciated,
Thanks,
Dee
cchrysler
1 Message
99
0
Posted October 26th, 2007 15:00