Solved!
Go to SolutionM
mcoomer146
1 Rookie
•
24 Posts
0
49403
January 6th, 2017 13:00
Alert! Front I/O Cable Failure
I recently purchased a Optiplex 790 SFF and I Thermaltake MiniTower. I moved all my hardware into the the Thernaltake to make expansions to my system at a later date. The 790 has 4 USB's and audio I/O on the front but the Thermaltake doesn't so I am not using the connection on the motherboard (Dell Inc. 0J3C2F). I am now getting an error: "Alert! Front I/O Cable Failure" every time I boot my system.
Is there a way to turn this off or skip it from checking to see if this is plugged in?
Any help would be great.
mcoomer146
1 Rookie
•
24 Posts
45991
1
Posted January 6th, 2017 13:00
That is annoying. There should be a setting built into the BIOS to by pass the check or disable it. Anyway, thanks for the info!
ejn63
11 Legend
•
87468 Posts
•
321253 Points
45991
0
Posted January 6th, 2017 13:00
The test/error cannot be disabled. The only way to remove it is to reconnect the cable to the original front panel.