‎CLIENT MAC ADDR | DELL Technologies

Start a discussion

UNSOLVED

HoJu

updated

23 years ago

HoJu

2 Posts

0

73045

February 21st, 2004 22:00

CLIENT MAC ADDR

I have a Dimension 8200 and when I try to boot-up I get this:

CLIEN MAC ADDR: 00 02 B3AAF0D7 GUID: 44454C4C-3300-1033-8033-

-CAC04F4C3131

PXE-E53: No boot filename received

PXE-M0F: Exiting Intel Boot Agent

Strike F1 to retry boot, F2 for setup utility

What does this mean and how do I fix this so that my computer will boot.

BS
Bill Snyder
266 Posts
7912
0
Posted February 21st, 2004 22:00
Which operating system are you using? If XP, then boot from the CD, enter the Recovery Console (press R at first stable screen). Once you are logged on to Windows, then run FIXBOOT and after that FIXMBR. If by chance the Recovery Console does not recognize a version of Windows on your machine, then your only recourse will be to do a re-install of Windows. If it is not XP (or 2K), good luck.
H
HoJu
2 Posts
7912
0
Posted February 22nd, 2004 00:00
I do have XP. So since I have XP this should work.
DD
DELL-Donald K
2 Intern
•
3969 Posts
7912
0
Posted February 23rd, 2004 01:00
You system is trying to boot thru the network card. This is an indication that it cannot "see" the hard drive. Boot to the BIOS & check to see the HDD is actually identified. If it is listed as UNKNOWN, then turn on Caps Lock, Num Lock & Scroll lock, press ALT+E then ALT+F then ALT+B to reboot & see if system boots to the HDD.

If you still canot get the HDD detected, I'd contact tech support.

DELL-Donald K
#IWork4Dell