
Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
K
KathyKelley
2 Posts
0
3577
August 12th, 2002 19:00
Remove Case
How do I remove the case on a Dimension 8200 desk top computer? I would appreciate a direct answer to this.
I would also like to know where I could have found the answer myself. Everything I found pertained to older computers with screws holding them together. Is there an old-fashioned manual for this computer that has things like elementary diagrams of the computer and the nuts and bolts of how to repair, upgrade etc.?
I would also like to know where I could have found the answer myself. Everything I found pertained to older computers with screws holding them together. Is there an old-fashioned manual for this computer that has things like elementary diagrams of the computer and the nuts and bolts of how to repair, upgrade etc.?
Responses (5)
Solutions (0)
Paul_Cussen
1 Rookie
•
98 Posts
301
0
Posted August 12th, 2002 19:00
KathyKelley,
The 8200 is a clam shell design. To open it, lay the case on its right hand side as you're looking at the front of it. Then, press the 2 buttons located at the back of the top and bottom of the case, and lift.
Paul
- KathyKelly,
Go to Reference above the "Posts" >User's Guide>Systems>Dimension Desktop>8200>Adding Parts>Opening the Computer Cover. You should end up here;
http://docs.us.dell.com/docs/systems/dim8200/replace.htm#1101667
This on line users Manual should help answer all your questions.
Marvin P
XPS B800r
512MB Ram
Windows XP (2/1/02)
&
8200 1.8G
512MB Ram
XP
&
Truck Vanity Plate "Dell4Me" (Maine) KathyKelley
2 Posts
301
0
Posted August 13th, 2002 10:00
I wish to thank all of you who responded to my post. I not only found the answer to my specific question, but also , and just important, was directed to the sites that will answer my future questions. My bookmarks are greatly enhanced through your answers. Thank you.

Denny Denham
2 Intern
•
18798 Posts
301
0
Posted August 12th, 2002 19:00
The instructions are here They should be in your user's manual, but the site above is reached through the Reference tab after which you select System|Dimension|8200|Adding and Removing Parts.