Solved!
Go to Solutionniteinvegas
2 Posts
53662
0
Posted May 7th, 2015 08:00
Hi,
I own the Dell S2240L and has been working fine on a VGA cable until recently i switched to a HDMI cable. Once i connected the monitor to the HDMI cable the monitor refreshed just to cut off portions on all four sides , i.e., the complete screen is not being used. Around 2cms on the horizontal axis & 1cm on the vertical axis is spared.
My screen resolution is: 1920x1080
Framerate: 60Hz.
The auto adjust and display options on the manual keys of the monitor are locked.
Kindly help.niteinvegas
2 Posts
53662
0
Posted May 11th, 2015 13:00
Thank you very much. This really worked :). Cheers mate.
dina.rockstar00
1 Message
53662
0
Posted August 8th, 2015 14:00
Did not work for me
I recently updated to windows 10
osprey4
6 Operator
•
34230 Posts
53662
1
Posted November 16th, 2012 15:00
Hi Dwbirt,
Two things to check First, make sure your desktop resolution is set to 1920x1080. Second, use the keys on the right side panel to center the image.