
UNSOLVED
Responses (7)
Solutions (0)
- For a t7200 C2D, the thermal specs are 100 deg. C (212 deg F).
- Property Value Number of CPU(s) One Physical Processor / 2 Cores / 2 Logical Processors / 64 bits Vendor GenuineIntel CPU Full Name Intel Core 2 Duo CPU Name Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz CPU Code Name Merom Technology 0.065µ Platform Name Socket 479 Type Original OEM processor FSB Mode QDR Platform ID 5 Microcode ID C7 Type ID 0 CPU Clock 1995.02 System Bus Clock 665.01 System Clock 166.25 Multiplier 12.00 Original Clock 2000.00 Original Bus Clock 666.67 Original System Clock 166.67 Original Multiplier 12.00 L2 Cache Speed 1995.02 MHz L2 Cache Speed Full CPU Family / Model / Stepping 6 / F / 6 Model Extended 0 HyperThreading 1 L1 I-Cache 32 KB L1 D-Cache 32 KB L2 Cache 4096 KB RDMSR 43080000 00000000 98548C25 00140000 MMX Yes MMX+ No SSE Yes SSE2 Yes SSE3 Yes SSSE3 Yes 3DNow! No 3DNow!+ No DualCore Yes HyperThreading No IA-64 No AMD64 No Intel 64 (EM64T) Yes XD Yes VT Yes SpeedStep Yes PowerNow! No LongHaul No LongRun No Architecture x86
mmainprize
260 Posts
375
0
Posted May 8th, 2007 21:00
What software are you running,i just came here looking for a way to check the laptops temps as my fan keep running on my brand new D620 in the docking stations, and standby and hibrinate both fail to see the mouse after it comes back with my KVM so the PC runs all day now just like my D600 did.I am using MBM on my XPS but not sure what to use on this new D620notladstyle
268 Posts
375
0
Posted May 9th, 2007 19:00
I use i8kfanGUI to check my temps - ive never seen mine over 66C (t2250 coreduo 1.73ghz)mmainprize
260 Posts
375
0
Posted May 9th, 2007 22:00
Thanks for the info, i did a search and found that software also in this forum.I tired the MBM 5.3.7 software on my D620 laptop and it did not work or i cound not fine the correct motherboard, so i installed the ik8fanGUI software and after a little configuration it works good.My CPU is at about 55c but the fan is running on high 3350 rpms all the time. I have not turned on fan control yet still looking at what i have before i start tweaking.

stripe999
137 Posts
375
0
Posted May 8th, 2007 16:00