
UNSOLVED
Closed
USB not working
I had to reload xp from scratch after ripping out service pack 2. XP can see the USB port and says everything is working but when I plug anything into it it doesn't recognize it. I have an 8200. Did I miss installing some hard ware? I'm also having the same problem with my wireless connection. It shows that I have a signal but won't let me connect to the internet.
Responses (7)
Solutions (0)
Did you install the ChipSet drivers.
As far as the wireless if you are using WPA on the router you need the WiFi rollup package from MS.
http://support.microsoft.com/default.aspx?scid=kb;EN-US;826942
Also what security system are you using?? WEP, WPA or NONE/Nothing. If nothing XP by default will not connect to a unsecure wireless connection. You have to go into the properties of the wireless connection and select Connect even though this wireless signal is unsecure, or something similar. If you are using a security system, WEP or WPA you need to type in the KEY to connect.
And for the USB what are you connecting to these ports?? And please don't say anything, tell me what you are connecting.
Message Edited by Ed C on 01-09-2005 09:56 AM
That could be most of the problem. All Dell notebook USB ports do NOT put out enough power to properly power most things so try connecting it to a external power source first. Have you tried a USB mouse in one or both of the ports and does the mouse work???
This is why I needed what you are trying to connect. Just saying NOTHING is recognized doesn't mean the ports aren't working. It all depends on what and how you are connecting it.
- I have the same problem with my 8000. One of the two ports has suddenly stopped working. I have connected a mouse, printer, PDA cradle and nothing works. The device manager however shows boths ports as working properly. Is it that ports just burn out? If so, can I replace it? Or do I need to buy a hub?

jrvenesky
5 Posts
449
0
Posted January 9th, 2005 11:00