UNSOLVED
E248WFP is not recognizing max windows resolution 1920 x 1200
Help!!! I set the resolution to 1920 x 1200 but the monitor only display 1600 x 1200.
The monitor settings button shows the current resolution as 1600 x 1200 and below
that it states the optimum resolution is 1920 x 1200.
Holding the mouse on the monitor edge scrolls to the left or right to show the rest of the display.
System info:
Windows XP: Service Pack 2
Graphics card: NVIDIA GeForce FX 5200
Graphics driver: NVIDIA 6.14.11.6921 (12/5/2007)
Monitor 1: DVI connection : E248WFP
Monitor 2: VGA connection : DELL 2007FP
Note... This problem does not exist if I switch the monitor cables like this:
Monitor 1: VGA connection : E248WFP
Monitor 2: DVI connection : DELL 2007FP
But this does not give me the best picture on my Primary monitor.
-Dave
Message Edited by mddave on 03-12-2008 06:24 PM
928
1
Posted March 13th, 2008 11:00
They are.. 60Hz is the only option.
Hiding modes that the monitor can't display.
I have also tried...
Reseting the NVIDIA graphics settings
Resetting the Monitors Factory settings (both monitors)
928
0
Posted March 13th, 2008 11:00
By itself, on both the VGA and the DVI, does the E248WFP do 1920x1200?
DELL-Chris M (old account)
#IWork4Dell
928
1
Posted March 13th, 2008 17:00
Chris,
I think I found my own problem...
Found this on the nvidia web site for my AGP 8X crad...
http://www.nvidia.com/page/pg_20040109440047.html
>> Dual RAMDACs (up to 400 MHz) for display resolutions up to and including 2048×1536 @ 85Hz
>> DVI support for compatibility with nextgeneration flat panel displays with resolutions up to and including 1600×1200
So It seems, I can set the DVI resolution larger but it will only display 1600x1200. As I have seen.
However VGA mode will display the full 1920x1200 on one screen.
Thanks for the help.
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
928
0
Posted March 12th, 2008 22:00
Open the Display settings and click each monitor pictured and verify that they are both set to 60 Hz.
DELL-Chris M (old account)
#IWork4Dell