Hi,

Are you sure about the backup command you mentioned.

It should be nsrxchsv -c {virtual hn} on the virtual server and you should initiate backup of the virtual server only.

Also what module version are you using for this?

i have inserted the nsrxchsv -c (virtual_hn). it gave me the following error when initiated the virtual machine in the backup: no such file or directory.

module version: 4.1.0.Build:148.
should i move to version nmexch50_win_x86.exe

if i save the IS for the virtual machine, what should the savesets of the 2 physical nodes?

If Exchange is to be backed up from the virtual node, you need not worry about the parameters for the physical nodes.

4.1 Build 533 or 5.0 should allways be better than what you are currently using.

Ideally, you should have Networker Client & Exchange modules installed on both the physical nodes. Create a client resoruce for both physical nodes & the virtual node. In the remote access of the virtual node, you should enter system@physical;node1 & system@physicalnode2 & then set backup command nsrxchsv -c VN & Save Set as MSEXCH:IS.

You should initiate the backup for the virtual node only.

Difficult to guess why it says "No such file or directory" since I have seen this message mostly for backup device but it could be that one of the aboive steps has not been followed.

That usually indicates that either saveset or backup command is wrong. In your case it is backup command which is called nsrxchsv and not nsrxchsv.

i tried all combinations of save sets and backup commnads, still having the following error:
savegrp: suppressed 3 lines of verbose output
[7128] 03/10/07 15:22:18 Performing an Exchange save operation; save level is Full (Legato Backup Level: full).
[7128] 03/10/07 15:22:18 Parsing parameters from the command line...
[7128] 03/10/07 15:22:18 xchutil(1117): Invalid application name G:\Backup 15-11-2006\exchange backup.bkf
[7128] 03/10/07 15:22:18 Error parsing parameter: G:\Backup 15-11-2006\exchange backup.bkf
[7128] 03/10/07 15:22:18 Backup operation finished with errors. No savetime was sent.

i have inserted all what you asked for, my current backup command is: nsrxchsv -c VN. save sets on all 3 nodes is tha same. G:\backup 15-11-2006\exchange backup.bkf
G:\ is an advanced file type.
any suggestions

I'm afraid I don't understand how is advanced file type related to Exchange backup parameters in this case. You will either have to post full configuration or talk to your support - it looks as configuration issue.

For Exchange backups, the save set should be MSEXCH: types. The device path should be there under devices not under save sets.

If G:\... is what you want to backup, then this if File System backup and you should not have a backup command for this - not nsrxchsv.exe atleast.

my new error is:
1 retry attempted
No full backups of this save set were found in the media database; performing a full backup
save: RAP error: Unable to grant NT CLUSTER CLIENT license to client mailx-srvr.sidf.gov.sa: Too many clients. Maximum is 4
save: Cannot open save session with backup-server.sidf.gov.sa

i initiated the virtual node with a saveset: G\Backup 11-15-2006 and no backup commnad.
the directory Backup 11-15-2006 is an advanced file type inside an advanced file type(G:\). could this be a problem.
for the license issue: there is 4 NT CLUSTER CLIENT. and we have 2 clusters each of 2 nodes. so the license should be ok.