Solved!
Go to SolutionUpgrade Networker 8.1 Client Machine
Hi guys,
I upgraded my file server which is a my networker clientt from windows Server 2008R2 to 2012R2 also I changed the hardware but I name the DC same as old DC name and same IP also
but now I got these Errors when I want add my client to my networker server again
1-Storage node is not ready
2-Storage node version is unknown
thanks For You help.
Best Regards,
Baban Ali
2154
0
Posted December 11th, 2017 10:00
There is absolute no need to delete/re-add the client.
But the messages about the storage node are strange. Where might those come from if not from this host.
2154
0
Posted December 11th, 2017 13:00
I do not know this confused me I will capture a screen and I will post it
thanks Bingo ...
2153
1
Posted December 12th, 2017 11:00
Check the storage node tab to identify if your Fileserver was designated as a storage node/dedicated storage node. If you find your file server there.....recheck if you have installed the Storage node binary as well on your new server.
This check should lead you to a resolution for this issue.
2153
0
Posted December 12th, 2017 12:00
The storage node software should not make a difference as long as you do not have a device configured.
2153
0
Posted December 12th, 2017 13:00
Thanks so much Mr.Bingo and Mr.Suraj
for your effort with me
I will try what you said Mr.Suraj and we will see
but sorry can you give me more detail
because i am new in Networker
thanks again
Best Regards,
baban Ali
2153
0
Posted December 13th, 2017 22:00
Thanks So Much Mr.SurajPujari For Your advice
I will see it now and I will send you a screen shoot
I use Data Domain.
2153
0
Posted December 14th, 2017 00:00
Hi Mr.SurajPujari
I did what you said I was able to see my fileserver
so I went to my file server and I removed networker user and reinstalled it with check storage node previously I was checked client there was 3 option
1- Client
2- Storage Node
3-server and Client
I chose a second one as you said after that I did
Nsradmin -p and print type: peer information I delete on both side and restart all service but I have same issue now same
2153
0
Posted December 14th, 2017 00:00
Hi Mr.SurajPujari
After I did what you said and then I Clicked on device Search and Thanks of God Fixed
Thanks so so so much I appreciate your help thanks again
Best Regards,
Baban Ali
304
0
Posted December 14th, 2017 11:00
Hi Baban,
Sorry to know that issue vanished and appeared again...Please take a look at daemon.raw file under storage node @ C:\Program Files\EMC NetWorker\nsr\logs...share it if possible.
Why are you still on 8.1.x as it is out of support now. Recommend you to upgrade it to a supported version as soon as you come out of this issue.
SurajPujari
155 Posts
2153
0
Posted December 13th, 2017 11:00
Here is what you have to do:
Open NMC and click on Devices tab to expand "Storage Nodes" as highlighted, check if you are able to see your fileserver name out there. If yes then go to your fileserver and install NetWorker binary along with storage node option selected.
What kind of devices are you using Tape or DataDomain?