UNSOLVED
https on 1052P switch
Hello all,
I have attempted a few times to enable https on our X1052P switches. I have logged into the CLI and did everything I saw posted to do. I did the ip https certificate number after doing the crypto certificate generate stuff. So I am not sure what I am doing wrong. I am thinking I am not importing the certificate right. Anyone ever do this before?
Thanks a lot,
Mike
I got a similar message but not the exact. As a test I installed the certificate in the store on my PC and it does come up in IE as https now. Not in Firefox. Normally we dont use IE. We have a bunch of these switches so to have to go to every pc manually and install the certificate is not what I'd like to do.
I never touched anything inside the switch GUI. Mine looked just like what you posted.
Thanks,
Mike
lmxrox
4 Posts
1422
0
Posted April 10th, 2018 06:00
Hi Daniel,
It just says server connection failed in any browser.
console#sh ip https
HTTPS server enabled. Port: 443
Certificate 1 is active.
Issued by : C=US, ST=NJ, L=Edison, CN=10.3.1.139, O= , OU=
Valid From: Apr 10 03:44:36 2018 GMT
Valid to: Jan 3 03:44:36 2021 GMT
Subject: C=US, ST=NJ, L=Edison, CN=10.3.1.139, O= , OU=
SHA1 Fingerprint: B54C209E 9DEA403B 2CE1879E A8F242D6 2F47A640
Certificate 2 is not active.
Issued by : C=US, ST=NY, L=NY, CN=0.0.0.0, O=MARVELL, OU=MARVELL
Valid From: Oct 1 09:06:28 2006 GMT
Valid to: Oct 1 09:06:28 2007 GMT
Subject: C=US, ST=NY, L=NY, CN=0.0.0.0, O=MARVELL, OU=MARVELL
SHA1 Fingerprint: 1A4CC4B7 0DF50999 586F1836 8F6B1DE8 DA9ABBBB
Interactive secure server timeout: 10 minutes, 0 seconds.
console#