UNSOLVED
Powerconnect 6248P - cannot connect to web interface.
Hello,
First post for me on the community forums!
I just updated the firmware on my switch to 3.3.18. I ran the setup wizard and everything seems to be working fine.I can successfully ping the switch from my network. I am not able to connect to the Dell web interface though, it just always says connection refused. When entering show ip interface management is has NONE for Configured IPv4 Protocol. Is that the problem, and how would I fix this? Everything else is as expected on that output like the ip, gateway, subnet.
Thanks!
DELL-Josh Cr
Community Manager
•
9700 Posts
•
43747 Points
1433
0
Posted April 13th, 2020 13:00
Try generating rsa and dsa keys.
Did you sort this out?? I just did the same thing. Switch has been fine for years but I upgraded the Firmware to 3.3.18 and now I cant get into the GUI. All my vLANS etc are all fine - just can't get back into the GUI.
Why Dell why?!?!?! I knew I shouldn't have updated the Firmware ...DELL-Young E
Moderator
•
5421 Posts
•
37 Points
680
0
Posted August 22nd, 2022 20:00
Hi, thanks for choosing Dell. This is quite normal when upgrading to a higher code.
Enable HTTPS/SSH and disable HTTP/Telnet for switch management on PowerConnect 6200 series switches.
Please configure on switch to access WEB GUI.Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!RachelGomez
2 Intern
•
162 Posts
627
0
Posted September 14th, 2022 03:00
I was able to eventually get through the web interface. It turns out that the system was not ready yet. I have 2 1 TB drives in a RAID-1 configuration, and it took the best part of 2 days to get into shape.
Once I was, I updated the firmware, and things seem to be working very well now.
Regards,
Rachel Gomez
DELL-Josh Cr
Community Manager
•
9700 Posts
•
43747 Points
1446
0
Posted April 13th, 2020 09:00
Hi,
Try generating an https certificate and enabling https, newer browsers are going to want to use https. Page 1347 https://dell.to/3ehR7x9