UNSOLVED
4529
0
Posted August 10th, 2021 09:00
What OS version are you running?
4529
0
Posted August 10th, 2021 09:00
Thanks for reply. Actually this command is not working on s4810.
can you advise further.
4528
0
Posted August 10th, 2021 09:00
4519
0
Posted August 10th, 2021 10:00
Unfortunately, if that command that Erman gave you didn’t work there is not another way to do it. Optics above 10gb only support qualified transceivers. https://dell.to/2XaP1el
4471
0
Posted August 20th, 2021 16:00
I've worked with the S4810's quite a bit, I've yet to see one not connect due to a non-qualified cable. Not saying it cant happen, I just havnt had that problem so far with the non-Dell cables I have tried that were non-qualified. Are you able to confirm a "supported" cable allows the connection to work?
#Iwork4Dell
DELL-Erman O
Moderator
•
2984 Posts
•
14874 Points
4533
0
Posted August 10th, 2021 02:00
Hello,
As far as I know this command is a little different for OS 10 on S series. Could you try to this console(config)# allow unsupported-transceiver
Hope this will help!
DELL-Erman O
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!