UNSOLVED
stack network switch N3248TE
Hello
I have a network switch N3248TE and I wish will put in stack with another 2 network switch N3048ET but I tried did and showed the next message in the command line:
could not set front panel stacking mode
The sw 3048 are in stack for SAS cable but this sw 3248 is by cable F.O in the SFP port front.
Which I can do for that stack work succesfull with the 3 network switch?
Thank
- Muzz -
1 Rookie
•
20 Posts
294
0
Posted December 15th, 2022 09:00
On the existing N3048ET you can run the command "show supported switchtype" which will list the switch models that are allowed to join that stack.
On the N3048ET you can do a MixedStacking with N30xx & N31xx but not with the N32xx
When you download the firmware .zip file it will have a .pdf file that will list the stacking compatibilities
You best bet is to attach the new N3248TE as a standalone with a duel homed port-channel to each of the member switches in your existing N3048ET stack.
Hope that helps