I have a 4600, about 4 years old and I have a problem with my network card. My ISP provides a 4 meg service but my card seems to restricting the download speed to around 2 instead of allowing the 4. I tried a USB connection and that allowed the 4 so it is definately the ethernet network card. I searched for drivers and tried to re install the original drivers but it will still not go above the 2 meg. I use a cable modem so did unplug the modem and restart the pc to effectively create a new connection and it picked it up ok. Could it be my card is just not functioning correctly? So I now think I need to just go and get a new ethernet network card install it and away I go, would anyone disagree with this as I cannot seem to get this card to go above 2. Any thoughts would be appreciated. :smileyhappy: Also is this a fairly simple piece to insert?
First try the following. Open Device Manager, click the + sign next to network adapters, right click your ethernet network adapter and select properties. Click ono the Advanced tab then find the setting for Speed & Duplex. Try different settings to see if you can get the full speed out of the card. If you can't, a relatively inexpensive troubleshooting step is to install a PCI ethernet adapter card (should cost less than $10) and see if that solves the problem.
1) check out your CPU utilization while transfering. I assume it's a base100 card and if it is, 4mbps really should be no problem at all.
2) download and try a program called cablenut (it's free). load the settings appropriate to your operating system and connection. it's worked very well for me in the past for improving internet transfer speeds.
volcano11
2 Intern
•
27973 Posts
137
0
Posted March 8th, 2007 22:00