i have try'd a lot of thing to get these two to boot, there a dell optiplex 320/380
i have replaced the ram, i used ddr3L, used a bunch of kits for the ddr2 one including dell ram, i took the cmos battery out, replaced it, and when its out same boot code, i have used a different higher wattage PSU
and i am going to get a new cpu, the motherboards looks fine, no grows goop, looks clean, no dust
i have no idea whats wrong, i don't think its the motherboard they look fine,
you maybe right i have been trouble shooting and found one of the 5 kits for the ddr2 optiplex 320
worked a 1 gig kit, all the kits work, i tested them on anther machine, using one stick atm, works, ima see updating the bios will do anything for the other kits,
thanks for the feed back,
i'll post the kit im using that worked see if it could help anyone else
The 1st pgh. also goes for your 320 (ram shouldn't be mixed). From the 380 Tech Guide:
Memory Your computer supports a maximum of 4 GB1 of memory when you use two 2-GB DIMMs. Memory modules should be installed in pairs of matched memory size, speed, and technology. If the memory modules are not installed in matched pairs, the computer will continue to operate, but with a slight reduction in performance.
fireberd
11 Legend
•
33399 Posts
•
112848 Points
900
0
Posted May 15th, 2020 05:00
Code 1-3-2 is associated with memory and if not the memory then the motherboard.
These are mid 2000 era machines. I would go for a different (won't find a new) motherboard first, rather than a CPU.
One source I found for motherboards. I know nothing about this site except I found it doing a search.
https://www.parts-people.com/index.php?action=category&id=157&subid=641&refine=motherboard