I would like to install 9 Dell power edge 2950 servers in a standard server cabinet, is there an installation guide that specifies maximum number, spacing, thermal loading etc.
Rack installation guide will help you install them --> http://support.dell.com/support/edocs/systems/pe2950/multlang/rig/TP579A00.pdf
Our racks can support fully loaded with 2950's. You'll have to determine if your datacenter floor is capable of handling the weight. The Dell Datacenter Capacity Planner will give you an exact weight and power requirements from your exact config --> http://www.dell.com/content/topics/topic.aspx/global/products/pedge/topics/en/config_calculator?c=us&l=en&cs=555
Scott Hanson
342 Posts
519
0
Posted February 4th, 2010 11:00
Our racks can support fully loaded with 2950's. You'll have to determine if your datacenter floor is capable of handling the weight. The Dell Datacenter Capacity Planner will give you an exact weight and power requirements from your exact config --> http://www.dell.com/content/topics/topic.aspx/global/products/pedge/topics/en/config_calculator?c=us&l=en&cs=555
Hope that helps.