Posts
Users
Search
aceljo
updated
16 years ago
1 Message
0
100790
June 10th, 2010 00:00
Hello,
I have a M1000e enclosure which is initialized and I would like to reset it to factory defaults but I didn't find a way on how to do it.
Any advice?
Thanks
Kind regards,
Haris
Responses (1)
Solutions (0)
Bill_H.
1572
1
Posted August 18th, 2010 09:00
(I know this Q is old.. I just came across it.)
I recently locked myself out by over-securing it.
AFAIK - Dell Support can take you through resetting an internal jumper, or you can probably use a RACADM command like ' racresetcfg ' to at least get the DRAC back to factory settings.
(source: Google / Dell Support boards)
Self Repair, Upgrade & Maintain
Diagnostics and Tools
Drivers & Downloads
Solve
Dell Laptop Computers
53
10
Optiplex Desktops
3
Inspiron
52
Latitude
54
Customer Care
35
View More
Bill_H.
1 Message
1572
1
Posted August 18th, 2010 09:00
(I know this Q is old.. I just came across it.)
I recently locked myself out by over-securing it.
AFAIK - Dell Support can take you through resetting an internal jumper, or you can probably use a RACADM command like ' racresetcfg ' to at least get the DRAC back to factory settings.
(source: Google / Dell Support boards)