UNSOLVED
Initializing UEFI, Please wait
Hi,
I have a new M710 and by mistake i i selected the option in the BIOS screen to start system services. Now i cannot get rid of this message after the BIOS posts it goes to this screen
Any idea how do i get back to the normal boot process. I have tried both cold and warm boots.
Thanks
8978
0
Posted January 9th, 2013 08:00
Hi,
When booting server
1.Press when prompted during POST
2.Go to System Services
3.Cancel System Services
4.Yes
1876
0
Posted January 12th, 2022 13:00
Unfortunately this doesnt work. I am not able to cancel these as there is no way to save it. I did a gif of what happened but i cannot upload it with this pathetic website. So many buggy issues with this servers, i am frustrated out of my mind.
1873
0
Posted January 12th, 2022 14:00
is yours an M710 as well? (btw, released in 2010)
does the system stop booting there? Does it allow you to go into the F2 screen?
#iwork4Dell1871
0
Posted January 12th, 2022 14:00
My server is a Poweredge m910. I am not sure what generation it is. I only recently deployed it and it is giving me tons of grief. The Poweredge m910 is a blade server , which is housed in the Dell M1000e chassis.
The only command available that i saw was control e through my java 6 console....at least that works...as it would not in the latest java.
So many niggly issues where i cannot solve them. Upgrading issues,
tommo666
4 Apprentice
•
1211 Posts
8978
0
Posted June 3rd, 2009 00:00
Try clearing the nvram settings, the jumpers are between the memory slots and the power supply connectors.
NVRAM_CLR
Pins 3 and 5
(default)
The configuration settings are retained at system boot.
Pins 1 and 3
The configuration settings are cleared at the next system boot. If the configuration settings become corrupted to the point where the system will not boot, install the jumper and boot the system. Remove the jumper before restoring the configuration information.