UNSOLVED
PE T310 - Memory Types allowed?
Have a T310 - PROCESSOR, X3430, 2.4/4.8, 8MB, XUL, B1 Had 4G ( 2 * 2G / Unbuffered DDR3 Dimm's 1333 ) Wanted to goto 32G and got: 4 - 8G Dimms / Dual Rank x 4, 1333 CL9 1.5V ECC Registered PC3-10600 Won't start at all - Event log says Mem configed, but unusable...?? I just want to find out what I need to buy...
- Yes, that was one thing the user was clear on. I did put the 4 - new 8G Rdimms into the correct slots. Lots of pictures showing what slots to use. Think there may be an issue since the RDimms are 2Rx4 instead of 2Rx8. Not sure but would like a list from dell telling me what I can use...
DELL-Josh Cr
Community Manager
•
9763 Posts
•
44886 Points
445
0
Posted July 7th, 2014 07:00
You are correct X4 is not supported, so that is the problem.
DELL-Josh Cr
Community Manager
•
9763 Posts
•
44886 Points
445
0
Posted July 15th, 2014 09:00
You can use 8GB DIMMs. Though we only supported quad rank on 8GB. So dual rank has not been validated.
DELL-Josh Cr
Community Manager
•
9763 Posts
•
44886 Points
445
0
Posted July 4th, 2014 09:00
Hi Rembrond,
Did you removed the existing UDIMMs? The New DIMMs you put in the white slots and the black slots next to them? ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-t310_Owner%27s%20Manual_en-us.pdf Page 110