Solved!
Go to SolutionVF
VTwin Farriers
1 Rookie
•
5 Posts
0
1230
February 23rd, 2017 14:00
R710 memory expansion problems
Have an R710 w/ 12x 2GB ECC Samsung RAM (M391B5673FH0 - 2GB 2Rx8 PC3 10600E 09 10 E1) installed in A/B 1/4/2/5/3/6 - 24GB total
Recently acquired another 12GB (6x Hynix HMT125U7TFR8C 2GB 2Rx8 PC3 10600E 9 10 E0) I wanted to populated into A/B 7/8/9 - 12GB total
However, populating these chips results in a non-responsive system - no POST - system powers up but no boot.
Do I have the memory configuration wrong?
VTwin Farriers
1 Rookie
•
5 Posts
869
0
Posted February 23rd, 2017 17:00
Can I use registered memory in those slots, or would I have to convert to all registered memory?
Daniel My
12 Elder
•
6205 Posts
869
0
Posted February 23rd, 2017 16:00
Hello
24GB is the maximum supported memory configuration when using UDIMMs. Populating slots 7,8,9 are not supported with UDIMMs. The memory population rules should be listed in the manual:
www.dell.com/support/home/product-support/product/poweredge-r710/manuals
Thanks