UNSOLVED

Bing59

updated

17 years ago

B

Bing59

1 Rookie

•

96 Posts

0

2117

March 15th, 2010 11:00

PowerPath and SCOM

We seem to be having some issues with getting Powerpath and SCOM to work together.  Does anyone out there have any ideas?  Getting somewhat of a run-around with Tech Support folks.

Seems to be a question of the Management Pack referencing a registry path to "ABC".   Which isn't available.  Twice we have downloaded the sealed MP from EMC and both times we got the same results.

Any help, thoughts would be greatly appreciated.

Bing

  • Brion2

    154 Posts

    356

    0

    Posted March 16th, 2010 08:00

    Hi.  Would you please provide more information as to the issue?  Also, what is your case number with Customer Service?

    Thanks.

  • Bing59

    1 Rookie

    •

    96 Posts

    356

    0

    Posted March 16th, 2010 09:00

    Brion,

    The case number is 33635538.  It seems to be an issue with a registry parameter being called from the Management Pack the parameter we are seeing is Registy Key “ABC”.

    My SCOM Engineer is out all this week, so I can only answer to a certain degree.

    Bing59

  • Brion2

    154 Posts

    356

    0

    Posted March 17th, 2010 04:00

    I spoke with escalation team and your issue is currently under review with both Customer Service and Engineering.  Please continue to work through Customer Service at this time.  Your issue will be resolved.  Thanks.

  • Joe_Ab

    2 Intern

    •

    227 Posts

    346

    0

    Posted March 17th, 2010 05:00

    Hi bing,

    i was trying to implement this but with no luck , am interested to know the results .

    thnx

  • Bing59

    1 Rookie

    •

    96 Posts

    356

    0

    Posted March 17th, 2010 07:00

    Let's Hope.

  • Brion2

    154 Posts

    356

    0

    Posted March 18th, 2010 04:00

    Hi.  It depends on the level of monitoring that you are looking for.  On Windows, the PowerPath Monitor provides a GUI-based tool for monitoring path state and status for all PowerPath-managed devices.  For all PowerPath-supported platforms, there is the "powermt" CLI.  You can create scripts to monitor specific information.  I find the "powermt display every=x" very useful (where "x" is the time in seconds).  This CLI command provides a looping output of state, status, IO/ses, and errors for each path. You could redirect its output to a file and monitor that file for specific words like "failed" or "dead."  Later this year, we will be introducing "PowerPath Viewer" which will provide a centralized graphical monitoring tool.  Administrators will be able to monitor hundreds of PowerPath hosts from a single Windows GUI.

    I hope this helps.

    -Brion

  • Joe_Ab

    2 Intern

    •

    227 Posts

    356

    0

    Posted March 18th, 2010 04:00

    Hi Brion ,

    is there is any way to monitor the paths without this SNMP Config tool ?? SNMP is full of vulnerabilities !

  • Joe_Ab

    2 Intern

    •

    227 Posts

    356

    0

    Posted March 18th, 2010 05:00

    I know man

    I was asking for a way to integrate SCOM without enabling the SNMP!

  • Brion2

    154 Posts

    356

    0

    Posted March 18th, 2010 05:00

    Ahhhh....gotcha!

    Sorry, but no.

  • Bing59

    1 Rookie

    •

    96 Posts

    424

    0

    Posted March 18th, 2010 07:00

    Will this GUI be able to send out alerts via Email or some other reporting tool?

    Later this year, we will be introducing "PowerPath Viewer" which will provide a centralized graphical monitoring tool.  Administrators will be able to monitor hundreds of PowerPath hosts from a single Windows GUI.


    And will it be a cost involved or a free supported App. that can be installed along with Powerpath.

    Bing